Adding the background image and the logos

  


Click on this icon located on the top left side of the page to download the folder containing the images è

Background Image

1.    On a blank page go to the formatting field and navigate down to “Page Background”

2.    Click on the “Add Image” icon

3.    Select the image to use and hit “Open”

4.    Adjust the Image Fit to “Fit” and Transparency to 69%


Part D Logo

1.    Navigate to the Insert Tab and click on the “Image” icon

2.    Select the image to use and hit “Open”

3.    Navigate the following sections in the “Format Image” field – From bottom to top

a.    Switch “Visual header” to Off

b.    Switch “Border” to On (Default Color will be black)

c.    Switch “Background” to On (Default color will be white)

d.    Click on the “General” drop-down and adjust the dimensions (Refer to the insight at the bottom of this page for a dimensions troubleshooting tip):

                                          i.    Set X Position = 5

                                        ii.    Set Y Position = 0

                                       iii.    Set Width = 218

                                       iv.    Set Height = 127


Colaberry Logo

1.    Navigate to the Insert Tab and click on the “Image” icon

2.    Select the image to use and hit “Open”

3.    Navigate the following sections in the “Format Image” field – From bottom to top

a.    Switch “Visual header” to Off

b.    Switch “Border” to On (Default Color will be black)

c.    Switch “Background” to On (Default color will be white)

d.    Click on the “General” drop-down and adjust the dimensions (Refer to the insight at the bottom of this page for a dimensions troubleshooting tip):

                                          i.    Set X Position = 5

                                        ii.    Set Y Position = 576

                                       iii.    Set Width = 218

                                       iv.    Set Height = 130



If the image/visual is not responding correctly to the provided input values, try inputting the values from the bottom up (i.e. starting with the Height value and moving on up to the X Position values.)